Tuesday 5 March 2013
Error Code 09,037.45 Xerox Phaser 8560
That's a ink loader error, due to the 8200 ink stick; to fix it
- Power down the printer.
- Hold the back button and the info button at the same time, without letting go, power up the printer.
- Keep holding down the buttons until the
XEROX logo comes fully to the center of the screen, keep holding for 2
more seconds, then let go. I'll take about a minute or two for the
Diagnostic screen to come up, the display will turn blank and black. - When the Diagnostic screen comes up go to down to the Function or
Exercise option, there will be an option that says "clear ISC faults"
it'll ask you to press OK to confirm, after you do then you will exit
Diagnostics and the printer will reboot. - It should be fine until it happens again. Until all the 8200 ink is
gone you will probably be doing this a few more times. Also make sure
the 8200 ink is not jammed inside the ink loader, if it is then you have
to un-jam it some how.
Related Posts : xerox
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment
Note: only a member of this blog may post a comment.