Friday 8 February 2013

Canon IR 5070 5570 6070 6570

Canon IR 5070 is a digital black & white copier machine with 50 copies/pages per minute. Drum stated yield is 3,000,000 and one toner cartridge makes about 45,000 A4 pages at 6% .
Fusing Cleaning Web Replacement:
Slide fuser/feeder unit out. Remove upper cover (one screw). Release the fuser cleaning web by removing front and rear screws. Open up and push the web feed roller and the web take up roller towards the rear to remove. Replace it with the new web. While installing the web make sure that the arm is outside of the roller and that tha new belt has oil in it where it contacts the roller. After repalcing the belt, go to COPIER-COUNTER-MISC-FIX WEB to reset and COPIER- COUNTER- DRBL1- FIX WEB to reset its counter.
Waste Toner:
when waste toner bottle is full E013-0001 will display. Go to service mode COPIER- COUNTER- MISC- WASTE TNE to reset.
Alarm Codes:
04 0001
Right deck lift
06 0003
Fuser Web missing
11 0001
Waste toner full
65 0001
Punch case full
61 0001
Staple
Trouble Codes
E000-000, 0010
Fuser did not heat up
E001-0001, 0002, 0003, 0010
Hight Fuser Temperature
E002-0000, 0001, 0010
Low Fuser Temperature

These codes must be reset by a service representative. To do so enter service mode, COPIER- FUNCTIONS- CLEAR- ERR. Press OK. Restart the machine

No comments:

Post a Comment

Note: only a member of this blog may post a comment.