printer and another guide

A printer that will not connect and/or displays the “Printer Offline” error message can be a nuisance, especially if the user has tried everything he/she can think of in order to fix it. Fortunately, users have several techniques at their disposal to repair this problem.

Ensure that Cables are Connected
Although this is the first thing most users do, the user should ensure that all of his/her printer’s cables are connected to thecomputer. Most users tend to simply check to see if his/her cables are connected to the printer, but do not check to see if the cables are actually connected to the computer as well. To be sure, the user should start at each cable’s printer-end, follow it to the computer, and plug in any cables that are not connected at both ends.

Restart the Printer
The next step the user should take is to restart his/her printer in order to reset any settings or jobs it is currently holding or press the reset button if it has one. The user should also take advantage of any built-in test options, wizards, or help features the printer has by scrolling through its menu.

Restart Computer
If the above method does not work, the user should restart his/her computer, especially if any cables had been disconnected. While the printer may have reset itself, the computer’s printer software may not have made the same adjustments. By restarting the computer, the user is forcing his/her computer to rescan the printer and recalibrate its settings.

Re-install Print Spooler
If restarting both the printer and computer does not work, the user can re-install his/her print spooler. A print spooler is the printing software found on a computer that handles communication with the printer as well as jobs the printer is waiting on. There are many different print spoolers available in both free and commercial versions, but the user would be wise to use the print spooler that his/her printer supports by conducting a search on the Internet that has the printer’s brand followed by “print spooler” or “printing software” as the keywords.

Are you experiencing problems with your printing queue? Perhaps you’ve got a whole bunch of print jobs in the spooler (printing queue) and a single print job has gone bad, freezing the entire queue. Or maybe you just want to know, for future erence, how you can cancel any print job that you’ve started?
How to Clear Print Jobs from within the Typical Printing Queue Interface

    Firstly, open up the Devices and Printers interface. This can be found in the Hardware and Sound section of the Control Panel.
    Right-click on the printer that has the print job that you wish to cancel. Select “See what’s printing.”
    Right-click on the print job that you wish to cancel. Select “Cancel.” If you wish to cancel all print jobs, select “Cancel All Documents” from the “Printer” menu.

How to Clear Print Jobs That Will Not Cancel from Within the Typical Printing Queue Interface
How to Remove Print Jobs in Windows

    Ensure that you have administrative privileges. Press +R. Type “cmd” and click “OK.” If you do not have administrative privileges, open the Start Menu -> All Programs -> Accessories and right-click on “Command Prompt” and select “Run as administrator” from the context menu.
    In the command prompt, type “net stop spooler” and press .
    Again, press +R. Type “C:/Windows/System32/spool/PRINTERS” and press .
    Delete the print jobs that you wish to cancel. If you wish to cancel all print jobs, press +A and then .
    Go back to your command prompt window, type “net start spooler” and press .
    Close all accumulated windows and get back to printing!

On the Aficio SP C821DN, as well as many other Ricoh color printers, you can print a color demo page that shows multi-colored fish as well as colored text.  This page is good for checking the color quality and image density of the printer.  To print the color demo page from a C821DN:

- Press the Menu button
- Scroll down to "List/Test Print"
- Press the OK button
- Scroll down to "Color Demo Page"
- Press the OK button

Warning, this is a spoof video. The ink level indicator is controlled by the green computer chip. Doing anything else on the cartridge itself (as shown in the video), will not change the ink level.

Methode Reset Waste Ink Counter for Canon Printers BJC series

Canon BJ-30 BJC-35v BJC-70 Printers reset methode (F14 Error Reset)

1. Unplug adapter
2. Hold POWER
3. Plug in ADAPTER
4. Release POWER after printer starts
5. Hold FF and MENU and press POWER
6. Release after beeps
7. Press <> Cartridge until 1A is displayed
8. Press ONLINE
9. Press POWER to shutoff printer
10. Unplug printer then re-plug printer
    

Canon BJC-50, BJC-55, BJC-80, BJC-85, Printers Waste Ink Tank Counter Reset Methode

1. Unplug Power Cord
2. Hold POWER and RESUME buttons
3. Plug in Power Cord
4. Release buttons after the printers starts up
5. Hold CARTRIDGE and RESUME
6. Press POWER
7. Release all buttons after the beeps
8. Press CARTRIDGE 16 times
9. Press RESUME
10. Unplug the Power cord
    

Canon Printers BJC-210 BJC-240 BJC-250 BJC-255 BJC-265BJC-4100 BJC-4200 BJC-4300 BJC-4400 BJC-4550 BJC-4650 Waste Ink Reset

1. Unplug Power Cord
2. Hold POWER and RESUME buttons
3. Plug in Power Cord
4. Release buttons
5. Open front door of printer
6. Hold the CARTRIDGE and RESUME buttons
7. Press POWER
8. Release all buttons after the beeps
9. Press CARTRIDGE once
10. Press RESUME
    

Canon BJC-600 BJC-600e BJC-610 BJC-620 Printers

1. Unplug Power Cord
2. Hold POWER and FF and Print Mode buttons
3. Plug in Power Cord
4. Release after the beeps
   

Canon BJC-2000 BJC-2100 Printers Waste Ink Counter Reset

1. Remove the Cartridge
2. Unplug the AC Power Cord
3. Close Front access panel
4. Hold down the RESUME/RESET button and plug in the AC power cord
5. Release RESUME/RESET after plugging in the AC Power cord.
6. Press the RESUME/RESET once within 5 seconds and release the RESUME/RESET .
7. Press and HOLD RESUME/RESET for two seconds or more and release it.
8. Press and HOLD RESUME/RESET for two seconds or more and release it.
9. Unplug AC Power Cord to set data.
   

Canon BJC-5000 Waste Ink Counter Reset

1. Power off printer
2. Press and hold RESUME then press POWER, The indicator will start blinking.
3. While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
4. When the indicator lights steady GREEN, press RESUME four(4)times. The indicator should be GREEN.
5. Press Power to set data
   

Service Test Print

• Power off printer
• Press and hold RESUME then press POWER, The indicator will start blinking.
• While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
• When the indicator lights steady GREEN, press RESUME two(2)times. The indicator should be GREEN.
• Press Power to Print
  

Nozzle Print

• Power off printer
• Press and POWER, until the printer beeps and release.
  

Demonstration Print

• While the printer in ON, Press and hold RESUME until the printer plays a melody of beeps.

Manual Service for Canon BJC-5100 Printes to Reset Waste Ink Counter

Self Test

• Switch Printer off. Hold Power for 1 beep.

Waste Counter Reset Canon BJC-5100

1. Power off printer
2. Press and hold RESUME then press POWER, The indicator will start blinking.
3. While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
4. When the indicator lights steady GREEN, press RESUME four(4)times. The indicator should be GREEN.
5. Press Power to set data
   

Service Test Print Canon BJC-5100

1. Power off printer
2. Press and hold RESUME then press POWER, The indicator will start blinking.
3. While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
4. When the indicator lights steady GREEN, press RESUME two(2)times. The indicator should be GREEN.
5. Press Power to Print
   

Nozzle Print Canon BJC-5100

1. Power off printer
2. Press and POWER, until the printer beeps and release.
   

Demonstration Print

• While the printer in ON , , Press and hold RESUME until the printer plays a melody of beeps.

Canon BJC-3000, BJC-6000, BJC-6100, BJC-6200, BJC-7000, BJC-7100, BJC-8000 Printers

1. Power off printer
2. Hold Resume button then press and hold POWER, the beeper will sound once.
3. Hold POWER and release RESUME
4. Press RESUME twice
5. When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
6. Press Power to set data

1. Refill your cartridge using your Mr. Ink Jet refill kit.
2. Following the diagram at right, place a piece of adhesive tape covering the Click here to enlarge only the four blue colored contacts (a contact is the individual copper square). Make sure that only those four are covered and no others. *Please note that the contacts shown are colored for illustrative purposes only. You will not have blue or red contacts on your cartridge.

3. Place cartridge in the printer. The printer may tell you that there is a problem with your cartridge. Ignore this message. The printer may print an alignment page. If so, allow it to do so.

4. Take the cartridge out of the printer. Remove the tape from the four blue contacts. Place the tape over the four red colored contacts. Make sure that only those four are covered and no others. *Please note that the contacts shown are colored for illustrative purposes only. You will not have blue or red contacts on your cartridge.

5. Follow step 3 again.

6. Take the cartridge out of the printer for the final time. Take the remaining tape off and place back in the printer. The printer should print out an alignment page and the estimated ink level in the toolbox should read full.

Reset Method 2:

1. Refill your cartridge using your Mr. Ink Jet refill kit.

2. Following the diagram at right, place a piece of adhesive tape covering the only the blue colored contact (a contact is the individual copper square). Make sure that only that contact is covered and no others. *Please note that the contacts shown are colored for illustrative purposes only. You will not have blue or red contacts on your cartridge.

3. Place cartridge in the printer. The printer may tell you that there is a problem with your cartridge. Ignore this message. The printer may print an alignment page. If so, allow it to do so.

4. Take the cartridge out of the printer. Leave the tape from blue contact. Place another piece of tape over the red colored contact. Make sure that only that contact is covered and no others. *Please note that the contacts shown are colored for illustrative purposes only. You will not have blue or red contacts on your cartridge.

5. Follow step 3 again.

6. Take the cartridge out of the printer for the final time. Take the remaining tape off and place back in the printer. The printer should print out an alignment page and the estimated ink level in the toolbox should read full.

Reset Method 3:

If neither of the reset methods above worked, you can cycle cartridges through to reset the level. You will need two extra cartridges and the one you refilled. First, put the refilled cartridge in the printer. Allow it to recognize the cartridge and print an alignment page. Take that cartridge out and place in the first extra cartridge. Allow it to recognize and print an alignment page. Take the first extra cartridge out and place the second extra cartridge in. Allow it to recognize and print an alignment page. Take the second extra cartridge out. Place the refilled cartridge back in the printer. It will print an alignment page and then the estimated ink level will be reset to full.

Resetting Ink-Waste Overflow Counter Canon Pixma iP3000, iP4000, iP5000 Printers

• With the printer plugged in and powered off, press and hold the Resume/Cancel button, then press and hold the Power button. (DO NOT release the buttons. The LED light should be green to indicate that a function is selectable.).

• While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power button)

• While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with orange)

• When the LED light is green, press the Resume/Cancel button 4 times. (Each time the Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with orange)

• Press the Power button. The LED lights in green, and the reset is performed. (When the operation completes, the printer returns to the menu selection mode automatically)

• Press the power button to exit service mode.

Note:
if you accidentally press the Resume/Cancel button more than 4 times in step 4 then just press the Resume/Cancel button at least 10 times and the printer will be returned to step 4 automatically

haii guys... this is my blog, i dedicated for you that need help printer trouble shooting